100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for 1.6 Mm Stainless Steel Arc Welding Rods , Gemini Welding Rods , Underwater Welding Electrodes , We have now designed a reputable track record among many shoppers. Quality&customer initially are normally our constant pursuit. We spare no attempts to produce greater solutions. Stay up for long-term cooperation and mutual positive aspects!
100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao Detail:

APPLICATIONS:

It is suitable for the welding of thin pieces of cast iron welding and machining surfaces, such as cylinder heads, important gray cast iron engine blocks, gear boxes, and Machine Tool and soon.

CHARACTERISTICS:

THZ308 is pure nickel welding core, strong reduction of graphite type coating iron rod. It can be used in AC and DC dual purpose and is  easy to operate. When welding, it is not necessary for weldment to preheat. It has good crack resistance and processability.

RECAUTIONS:

1. Before welding, the electrodes need to be baked for 1 hour with the temperature of 150±10℃ before using.
2 It can eliminate welding stress and avoid crack by hammering the welding seam.
3. In order to reduce the impurity elements in the base metal penetration weld, narrow white band width, improve crack resistance and processing properties, it should use small current welding in cast iron cold welding.

Chemical Composition of the deposited metal(the mass fraction): %  

Elements

C

Si

Mn

S

Fe

Ni

The mass of other elements

Standard value

≤2.0

≤2.5

≤1.0

≤0.03

≤8.0

≥90

≤1.0

Welding reference current: (AC,DC+)

Electrode diameter(mm)

2.5

3.2

4.0

Welding current(A)

60-90

90-110

120-150

Welding distortion correction:

For deformation correction in hot state, mechanical correction and hammering are strictly prohibited in the range of blue brittle temperature (300℃~500℃) to avoid brittle cracks.

Pay attention to the following requirements when the flame is locally heated

It is not advisable to repeat heating at the same part to avoid changes in the metallographic structure and mechanical properties of the steel.

Do not cause repeated corrections of tension and compression in the same part.

For hardenable welded parts, watering and rapid cooling are strictly prohibited.

Welding parts that need to be annealed should be rectified before annealing to eliminate internal stress during annealing. During annealing, the welded parts must be placed steadily so as not to deform again.

The flame straightening heating temperature can be 700℃~850℃ (fuchsia), and should not exceed 900℃ (bright red) for low alloy structural steel.


Product detail pictures:

100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

We're commitment to offer you the competitive price ,remarkable products excellent, also as fast delivery for 100% Original Factory E6014 Electrode - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao, The product will supply to all over the world, such as: Melbourne, Sacramento, San Francisco, We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information if you have any questions. We are glad to work for every client.

  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Penny from Malaysia - 2017.10.27 12:12
    This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
    5 Stars By Freda from Ecuador - 2017.12.31 14:53

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: