Cheapest Factory China Good Quality! Fcaw Flux Cored Welding Wire Aws E71t-1c 1.2mm, 1.6mm

Short Description:


  • Min.Order Quantity: 5 ton
  • Supply Ability: 2000 tons per Month
  • Free Sample: Available
  • Custom packaging: Welcome
  • Product Detail

    Product Category

    Product Tags

    We’re committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Cheapest Factory China Good Quality! Fcaw Flux Cored Welding Wire Aws E71t-1c 1.2mm, 1.6mm, Currently, we are seeking ahead to even bigger cooperation with abroad buyers determined by mutual benefits. Please sense absolutely free to contact us for more details.
    We’re committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for China Flux Cored Welding Wire, Fcaw E71t-1c, Now we have more than 10 years exported experience and our merchandise have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
    Applications:

    AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

    NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

    Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

    Shielding Gas:  Gasless
    Chemical Composition of deposited metal (%)

    Item Mn Si P S A1 Ni Mo Cr C V
    Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

    Mechanical Properties Of Deposited Metal

    Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
    Test Temp.(°C) Impact Energy(J) Average(J)
    Standard ≥400 ≥480 ≥20 / / /

    5.Size and Recommended Current (DC-) and Voltage Range

    Size Voltage Range Current (DC-) Wire feed speed
    0.8MM 16~18V 100~160A 30~60
    0.9MM 16~19V 100~170A 30~65
    1.2MM 16~20V 120~200A 35~70

    Available Diameters:

    Dia. (mm): 0.8 0.9 1.0 1.2
    (inch) 0.030” 0.035” 0 .040” 0.045”

    Packing :
    1kg / 5kgs per spool;
    precision winding, heat shrinkable film and then packed in cartons.We’re committed to furnishing easy,time-saving and money-saving one-stop purchasing support of consumer for Cheapest Factory China Good Quality! Fcaw Flux Cored Welding Wire Aws E71t-1c 1.2mm, 1.6mm, Currently, we are seeking ahead to even bigger cooperation with abroad buyers determined by mutual benefits. Please sense absolutely free to contact us for more details.
    Cheapest Factory China Flux Cored Welding Wire, Fcaw E71t-1c, Now we have more than 10 years exported experience and our merchandise have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!


  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: