Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

The really abundant projects management experiences and 1 to just one provider model make the high importance of business enterprise communication and our easy understanding of your expectations for 309l Electrode , E316l , 7080 Welding Rod , Making the Products of Large Quality is definitely the everlasting purpose of our enterprise. We make unremitting endeavours to know the target of We Will Always Hold in Pace along with the Time.
Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao Detail:

APPLICATIONS:

It is suitable for the welding of thin pieces of cast iron welding and machining surfaces, such as cylinder heads, important gray cast iron engine blocks, gear boxes, and Machine Tool and soon.

CHARACTERISTICS:

THZ308 is pure nickel welding core, strong reduction of graphite type coating iron rod. It can be used in AC and DC dual purpose and is  easy to operate. When welding, it is not necessary for weldment to preheat. It has good crack resistance and processability.

RECAUTIONS:

1. Before welding, the electrodes need to be baked for 1 hour with the temperature of 150±10℃ before using.
2 It can eliminate welding stress and avoid crack by hammering the welding seam.
3. In order to reduce the impurity elements in the base metal penetration weld, narrow white band width, improve crack resistance and processing properties, it should use small current welding in cast iron cold welding.

Chemical Composition of the deposited metal(the mass fraction): %  

Elements

C

Si

Mn

S

Fe

Ni

The mass of other elements

Standard value

≤2.0

≤2.5

≤1.0

≤0.03

≤8.0

≥90

≤1.0

Welding reference current: (AC,DC+)

Electrode diameter(mm)

2.5

3.2

4.0

Welding current(A)

60-90

90-110

120-150

Welding distortion correction:

For deformation correction in hot state, mechanical correction and hammering are strictly prohibited in the range of blue brittle temperature (300℃~500℃) to avoid brittle cracks.

Pay attention to the following requirements when the flame is locally heated

It is not advisable to repeat heating at the same part to avoid changes in the metallographic structure and mechanical properties of the steel.

Do not cause repeated corrections of tension and compression in the same part.

For hardenable welded parts, watering and rapid cooling are strictly prohibited.

Welding parts that need to be annealed should be rectified before annealing to eliminate internal stress during annealing. During annealing, the welded parts must be placed steadily so as not to deform again.

The flame straightening heating temperature can be 700℃~850℃ (fuchsia), and should not exceed 900℃ (bright red) for low alloy structural steel.


Product detail pictures:

Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Factory best selling E308l Welding Rod - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao, The product will supply to all over the world, such as: Denmark, Panama, Puerto Rico, Our Company policy is quality first, to be better and stronger, sustainable development . Our pursuit goals is for society, customers, employees, partners and enterprises to seek reasonable benefit. We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.

  • The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Ray from Croatia - 2017.11.29 11:09
    We are old friends, the company's product quality has been always very good and this time the price is also very cheap.
    5 Stars By James Brown from US - 2017.11.12 12:31

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: