Factory Free sample Vacuum Pack Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

Assume full duty to satisfy all demands of our clients; reach steady advancements by marketing the development of our purchasers; grow to be the final permanent cooperative partner of clientele and maximize the interests of customers for Austarc Welding Rods , Hard Facing Rod , Welding Rod Tube , We are trying to get for in depth cooperation with sincere shoppers, attaining a new result in of glory with customers and strategic partners.

Factory Free sample Vacuum Pack Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao Detail:

High manganese steel surfacing electrode D256 AWS: EFeMn-A

APPLICATIONS:

It is suitable for surfacing welding of various crusher, high manganese rail, bucket, bulldozer, etc.

CHARACTERISTICS:

THD256 is the surfacing electrode of high manganese steel with low hydrogen potassium coating.Can be both ac and dc (ac welding, no-load voltage is not lower than 70V), surfacing welding should use small current, narrow welding, while the red heat immediately hammer or water quenching, in order to reduce the crack tendency.The surfacing metal is austenitic high manganese steel, which has the characteristics of working hardening, toughness and wear resistance.

ATTENTION:

1. Before welding, the electrode shall be baked at 300-350℃ for 1 hour before use.

2. For surfacing welding of worn parts of high manganese steel, the fatigue layer shall be removed or treated with water toughness or soldered with chromium manganese steel electrode (such as D277).

3. Due to the large yellow smoke during surfacing welding, attention should be paid to strengthen ventilation and operate in the windswept position.

WELDING POSITIONS: PA, PB, PC, PD, PE, PF

DEPOSIT COMPOSITION (QUALITY SCORE): %

Items	C	Mn	Si	Others
Requirements	≤1.10	11.00-16.00	≤1.30	≤5.00

TYPICAL OPERATING PROCEDURES: (AC,DC)

Diameter (mm)	3.2	4.0	5.0
Current (A)	70-90	100-140	150-180

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

We stick to the principle of quality first, service first, continuous improvement and innovation to meet the customers for the management and zero defect, zero complaints as the quality objective. To perfect our service, we provide the products with the good quality at the reasonable price for Factory Free sample Vacuum Pack Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao, The product will supply to all over the world, such as: Austria, Austria, Juventus, Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.