Factory making Hobart Welding Rods - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao
Factory making Hobart Welding Rods - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao Detail:
High manganese steel surfacing electrode D256 AWS: EFeMn-A
APPLICATIONS:
It is suitable for surfacing welding of various crusher, high manganese rail, bucket, bulldozer, etc.
CHARACTERISTICS:
THD256 is the surfacing electrode of high manganese steel with low hydrogen potassium coating.Can be both ac and dc (ac welding, no-load voltage is not lower than 70V), surfacing welding should use small current, narrow welding, while the red heat immediately hammer or water quenching, in order to reduce the crack tendency.The surfacing metal is austenitic high manganese steel, which has the characteristics of working hardening, toughness and wear resistance.
ATTENTION:
1. Before welding, the electrode shall be baked at 300-350℃ for 1 hour before use.
2. For surfacing welding of worn parts of high manganese steel, the fatigue layer shall be removed or treated with water toughness or soldered with chromium manganese steel electrode (such as D277).
3. Due to the large yellow smoke during surfacing welding, attention should be paid to strengthen ventilation and operate in the windswept position.
WELDING POSITIONS: PA, PB, PC, PD, PE, PF
DEPOSIT COMPOSITION (QUALITY SCORE): %
| Items | C | Mn | Si | Others |
| Requirements | ≤1.10 | 11.00-16.00 | ≤1.30 | ≤5.00 |
TYPICAL OPERATING PROCEDURES: (AC,DC)
| Diameter (mm) | 3.2 | 4.0 | 5.0 |
| Current (A) | 70-90 | 100-140 | 150-180 |
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
Control the standard by the details, show the power by quality. Our organization has strived to establish a highly efficient and stable employees team and explored an effective high-quality command method for Factory making Hobart Welding Rods - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao, The product will supply to all over the world, such as: Georgia, Argentina, Denver, Our Company policy is quality first, to be better and stronger, sustainable development . Our pursuit goals is for society, customers, employees, partners and enterprises to seek reasonable benefit. We aspirate to do cooperate with all different the auto parts manufacturers, repair shop, auto peer , then create a beautiful future! Thank you for taking time to browse our website and we would welcome any suggestions you may have that can help us to improve our site.
By Agustin from Johor - 2017.12.19 11:10
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Mavis from Belize - 2018.02.21 12:14
