Factory Outlets 16tc Welding Rods - E71T-GS— flux cored welding wire – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for E70xx Welding Electrodes , Underwater Welding Electrodes , Rajdeep Welding Rod , With our rules of small business standing, partner trust and mutual benefit, welcome all of you to definitely do the job alongside one another , grow together.

Factory Outlets 16tc Welding Rods - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas: Gasless
Chemical Composition of deposited metal (%)

Item	Mn	Si	P	S	A1	Ni	Mo	Cr	C	V
Standard	≤1.75	≤0.60	≤0.03	≤0.03	≤1.80	≤0.50	/	/	/	/

Mechanical Properties Of Deposited Metal

Item	Yield Point (MPa)	TensileStrength (MPa)	Elongation (%)	Charpy V-notch Impact Toughness
				Test Temp.(°C)	Impact Energy(J)	Average(J)
Standard	≥400	≥480	≥20	/	/	/

5.Size and Recommended Current (DC-) and Voltage Range

Size	Voltage Range	Current (DC-)	Wire feed speed
0.8MM	16~18V	100~160A	30~60
0.9MM	16~19V	100~170A	30~65
1.2MM	16~20V	120~200A	35~70

Available Diameters:

Dia. (mm):	0.8	0.9	1.0	1.2
(inch)	0.030”	0.035”	0 .040”	0.045”

Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

Excellent 1st,and Client Supreme is our guideline to deliver the ideal provider to our prospects.Nowadays, we have been seeking our best to become certainly one of the most effective exporters in our discipline to meet shoppers more require for Factory Outlets 16tc Welding Rods - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Romania, Sacramento, Venezuela, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.