Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for 312 Welding Rod , Wia 4313a Welding Rods , 77 Welding Rod , Welcome you to be a part of us alongside one another to create your company easier. We're normally your finest partner when you want to have your own organization.
Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas:  Gasless
Chemical Composition of deposited metal (%)

Item Mn Si P S A1 Ni Mo Cr C V
Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

Mechanical Properties Of Deposited Metal

Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
Test Temp.(°C) Impact Energy(J) Average(J)
Standard ≥400 ≥480 ≥20 / / /

5.Size and Recommended Current (DC-) and Voltage Range

Size Voltage Range Current (DC-) Wire feed speed
0.8MM 16~18V 100~160A 30~60
0.9MM 16~19V 100~170A 30~65
1.2MM 16~20V 120~200A 35~70

Available Diameters:

Dia. (mm): 0.8   0.9 1.0 1.2
(inch) 0.030” 0.035” 0 .040” 0.045”

Packing :
 1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.


Product detail pictures:

Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

We emphasize advancement and introduce new products and solutions into the market each year for Factory selling Special Welding Rod - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Gambia, Armenia, Turkey, Our stock have valued 8 million dollar , you can find the competitive parts within short delivery time. Our company is not only your partner in business, but also our company is your assistant in the coming corporation.

  • We are long-term partners, there is no disappointment every time, we hope to maintain this friendship later!
    5 Stars By Faithe from Iran - 2018.05.22 12:13
    The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
    5 Stars By Elaine from Peru - 2018.06.03 10:17

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: