Factory source Tungsten Rod 2.4 Mm - Z408 Pure Nickel Cast Iron Electrode AWS ENiFe-CI – Tianqiao
Factory source Tungsten Rod 2.4 Mm - Z408 Pure Nickel Cast Iron Electrode AWS ENiFe-CI – Tianqiao Detail:
APPLICATIONS:
It is suitable for the welding of high-strength gray iron and nodular cast iron, such as cylinder, engine block, gear box,etc..
CHARACTERISTICS:
Z408 is the cast iron electrode with nickel iron alloy core and strong reduction of graphite coating . It can be used in AC and DC dual purpose, has stable arc,and is easy to operate. The electrode has the characteristics of high strength, good plasticity, low linear expansion coefficient and so on. The crack resistance for grey cast iron is as much as that for Z308, while the crack resistance for nodular cast iron is more than Z308. For cast iron with higher phosphorus (0.2%P), it also has a good results and its tocutting performance is lower than Z308 andZ508 slightly. Z408 is used in the welding of gray iron and nodular cast iron for room
ATTENTION:
Before welding, the electrodes need to be baked for 1 hour with the temperature of 150±10℃ before using.
When welding ,it is appropriate to take narrow weld and each weld length should not exceed 50mm. Hammer the welding area lightly with a hammer immediately after welding in order to eliminate stress and prevent cracks.
Lower heat input is recommend.
Chemical Composition of the deposited metal(the mass fraction): %
|
Elements |
C |
Si |
Mn |
S |
Fe |
Ni |
Cu |
The mass of other elements |
|
Standard value |
0.35-0.55 |
≤0.75 |
≤ 2.3 |
≤0.025 |
3.0- 6.0 |
60- 70 |
25- 35 |
≤ 1.0 |
Welding reference current:(AC,DC+)
|
Electrode diameter(mm) |
3.2 |
4.0 |
5.0 |
|
Length (mm) |
350 |
350 |
350 |
|
Welding current(A) |
90-110 |
120-150 |
160-190 |
FAQ:
1.Hot specifications:
E6013, E6011, E6010, E7018, S.S. E308, E309, E310, E316
2.OEM design:
Yes, we can print your logo on the welding electrode; also make your brand packing box.
3.Free samples?
Yes, if you need 1 or 2 kgs. But the freight cost is paid by yourside.
4.Certifications:
ISO, SGS, our registered brand “ TIANQIAO” “YUANQIAO”, etc.
5.Delivery time?
10-15 days after we received your deposit.
6. MOQ?
One full 20ft container, that is 25tons.
7.Payment term?
30% T/T in advance and balance before loading container.
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
We know that we only thrive if we will guarantee our combined cost competiveness and high-quality advantageous at the same time for Factory source Tungsten Rod 2.4 Mm - Z408 Pure Nickel Cast Iron Electrode AWS ENiFe-CI – Tianqiao, The product will supply to all over the world, such as: Norway, Slovak Republic, Accra, We've a good reputation for stable quality solutions, well received by customers at home and abroad. Our company would be guided by the idea of Standing in Domestic Markets, Walking into International Markets. We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!
By Honey from Armenia - 2018.12.11 11:26
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Nana from New York - 2018.12.30 10:21
