Factory wholesale Electrode Spot Welding - E71T-GS— flux cored welding wire – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for 7011 Welding Rod , 7018 Welding Rods Australia , Captain Welding Electrodes , Making the Products of Large Quality is definitely the everlasting purpose of our enterprise. We make unremitting endeavours to know the target of We Will Always Hold in Pace along with the Time.

Factory wholesale Electrode Spot Welding - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas: Gasless
Chemical Composition of deposited metal (%)

Item	Mn	Si	P	S	A1	Ni	Mo	Cr	C	V
Standard	≤1.75	≤0.60	≤0.03	≤0.03	≤1.80	≤0.50	/	/	/	/

Mechanical Properties Of Deposited Metal

Item	Yield Point (MPa)	TensileStrength (MPa)	Elongation (%)	Charpy V-notch Impact Toughness
				Test Temp.(°C)	Impact Energy(J)	Average(J)
Standard	≥400	≥480	≥20	/	/	/

5.Size and Recommended Current (DC-) and Voltage Range

Size	Voltage Range	Current (DC-)	Wire feed speed
0.8MM	16~18V	100~160A	30~60
0.9MM	16~19V	100~170A	30~65
1.2MM	16~20V	120~200A	35~70

Available Diameters:

Dia. (mm):	0.8	0.9	1.0	1.2
(inch)	0.030”	0.035”	0 .040”	0.045”

Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

To create much more price for clients is our company philosophy; purchaser growing is our working chase for Factory wholesale Electrode Spot Welding - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Bangkok, Detroit, USA, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.