Featured

  • High Performance Easy Welding Rods - Stainless Steel Welding Electrode AWS E316-16 (A202) – Tianqiao

    High Performance Easy Welding Rods - Stainless Steel Welding Electrode AWS E316-16 (A202) – Tianqiao

    APPLICATIONS: It is suitable for welding 06Cr17Ni12Mo2 stainless steel equipment working in organic and inorganic acid (non-oxidizing acid) medium. It can also be used for welding high chromium steels or dissimilar steels that cannot be heat-treated after welding. CHARACTERISTICS: E316-16 is a Cr18Ni12Mo2 stainless steel electrode with rutile coating. Both AC and DC can be used for all-position welding. It has excellent welding performance. Deposited metal has good corrosion resistance, heat ...
  • 100% Original Hard Facing Welding Electrode -  Stainless Steel Welding Electrode AWS E309L-16(A062) – Tianqiao

    100% Original Hard Facing Welding Electrode - Stainless Steel Welding Electrode AWS E309L-16(A062) – Tianqiao

    APPLICATIONS: It is suitable for welding the same type of stainless steel structure, composite steel and dissimilar steel components made by synthetic fiber, petrochemical equipment, etc. It can also be used for surfacing of transition layer of inner wall of pressure equipment of nuclear reactor and welding of structure inside tower. CHARACTERISTICS: E309L-16 is an ultra-low carbon Cr23Ni13 stainless steel electrode used in rutile type pressure equipment. Cross – direct, can be used for...
  • Renewable Design for  Welding Electrodes – ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao

    Renewable Design for Welding Electrodes – ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao

    ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047   APPLICATION: Used for jointing or overlay light alloy processing. It also widely used as filler materials in argon arc welding and oxyacetylene gas welding. Argon arc welding is a perfect method for welding copper aluminum alloy. Argon arc welding can not use flux, but oxyacetylene gas welding needs to use aluminum gas welding flux. The selection of welding wire is mainly based on the type of base metal and the requirements of ...
  • Factory wholesale Storing Welding Rods - MIG TIG solid welding wire AWS ER4303 ER5356 for aluminum welding 7kg per plastic spool – Tianqiao

    Factory wholesale Storing Welding Rods - MIG TIG solid welding wire AWS ER4303 ER5356 for aluminum welding 7kg per plastic spool – Tianqiao

    MIG TIG solid welding wire AWS ER5356 for aluminum welding 7kg per plastic spool   APPLICATIONS: It is suitable for welding aluminum alloy in Marine, sports equipment, aviation and railway locomotive industries. CHARACTERISTICS: ER5356 are aluminum magnesium alloy welding wire.It is used for welding aluminum-magnesium alloys with high magnesium content. It has high strength, good for gability and excellent seawater corrosion resistance.   ATTENTION: 1.The oxide, grease, moisture and other imp...
  • Factory made hot-sale 6mm Welding Rods - Mild Steel  Welding Electrode AWS E6010  – Tianqiao

    Factory made hot-sale 6mm Welding Rods - Mild Steel Welding Electrode AWS E6010 – Tianqiao

    APPLICATIONS: It is suitable for welding of low carbon steel structure as pipeline, shipbuilding and etc. CHARACTERISTICS:  E6010 is a rutile-cellulosic sodium type electrode. Can be weld for all-position (especially for vertical-down position) with DC+ only. It have excellent welding performance as stable arc, little spatter, easy slag removal and reignition-ability etc. Better molten pool control, stronger arc force and deeper penetration at vertical-down position. ATTENTION: 1. In general...
  • Factory Supply Welding Electrode E6013 - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao

    Factory Supply Welding Electrode E6013 - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao

    High manganese steel surfacing electrode D256 AWS: EFeMn-A   APPLICATIONS: It is suitable for surfacing welding of various crusher, high manganese rail, bucket, bulldozer, etc.   CHARACTERISTICS: THD256 is the surfacing electrode of high manganese steel with low hydrogen potassium coating.Can be both ac and dc (ac welding, no-load voltage is not lower than 70V), surfacing welding should use small current, narrow welding, while the red heat immediately hammer or water quenching, in o...
  • Factory supplied 2.5 Mm Welding Electrode - Stainless Steel Welding Electrode AWS E309-16 (A302) – Tianqiao

    Factory supplied 2.5 Mm Welding Electrode - Stainless Steel Welding Electrode AWS E309-16 (A302) – Tianqiao

    APPLICATIONS: Suitable for welding the same type of stainless steel, stainless steel lining, different steels (such as Cr19Ni10 and low carbon steel, etc.) as well as gaoluo steel, high manganese steel, etc. CHARACTERISTICS: E309-16 is a Cr23Ni13 stainless steel electrode for rutile skin pressure equipment. Both ac and DC can be used for all position welding. Excellent welding performance. The deposited metal has good crack resistance and oxidation resistance. ATTENTION: 1. Before welding, th...
  • Factory directly Duplex Welding Rod - E71T-GS— flux cored welding wire – Tianqiao

    Factory directly Duplex Welding Rod - E71T-GS— flux cored welding wire – Tianqiao

    Applications: AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy. NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which requi...
  • OEM/ODM China E6013 Welding Rod - Surfacing Welding Rod D608 – Tianqiao

    OEM/ODM China E6013 Welding Rod - Surfacing Welding Rod D608 – Tianqiao

    Introduction: D608 is a kind of CrMo cast iron surfacing electrode with graphite type coating. AC/DC. DCRP (Direct CurrentReversed Polarity) is more suitable. Because the surfacing metal is Cr and Mo carbide with cast iron structure, the surfacing layer has higher hardness, higher wear-resistance and excellent silt and ore wear-resistance. Applications: Used for welding parts of agricultural machinery, mining equipment, etc. which receive grit wear and slight impact. Chemical Composition o...
  • 18 Years Factory 7014 Rod - Surfacing Welding Rod D608 – Tianqiao

    18 Years Factory 7014 Rod - Surfacing Welding Rod D608 – Tianqiao

    Introduction: D608 is a kind of CrMo cast iron surfacing electrode with graphite type coating. AC/DC. DCRP (Direct CurrentReversed Polarity) is more suitable. Because the surfacing metal is Cr and Mo carbide with cast iron structure, the surfacing layer has higher hardness, higher wear-resistance and excellent silt and ore wear-resistance. Applications: Used for welding parts of agricultural machinery, mining equipment, etc. which receive grit wear and slight impact. Chemical Composition o...

Send your message to us: