High Quality for Ss Welding Electrode - E71T-GS— flux cored welding wire – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

Persisting in High quality, Prompt Delivery, Competitive Price, we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for Avesta Welding Rod , Nickel Welding Rod , Galvanized Welding Rods , We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.

High Quality for Ss Welding Electrode - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas: Gasless
Chemical Composition of deposited metal (%)

Item	Mn	Si	P	S	A1	Ni	Mo	Cr	C	V
Standard	≤1.75	≤0.60	≤0.03	≤0.03	≤1.80	≤0.50	/	/	/	/

Mechanical Properties Of Deposited Metal

Item	Yield Point (MPa)	TensileStrength (MPa)	Elongation (%)	Charpy V-notch Impact Toughness
				Test Temp.(°C)	Impact Energy(J)	Average(J)
Standard	≥400	≥480	≥20	/	/	/

5.Size and Recommended Current (DC-) and Voltage Range

Size	Voltage Range	Current (DC-)	Wire feed speed
0.8MM	16~18V	100~160A	30~60
0.9MM	16~19V	100~170A	30~65
1.2MM	16~20V	120~200A	35~70

Available Diameters:

Dia. (mm):	0.8	0.9	1.0	1.2
(inch)	0.030”	0.035”	0 .040”	0.045”

Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

To be able to give you benefit and enlarge our business, we also have inspectors in QC Team and assure you our greatest service and products for High Quality for Ss Welding Electrode - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: moldova, Iran, Afghanistan, Our products are exported worldwide. Our customers are always satisfied with our reliable quality, customer-oriented services and competitive prices. Our mission is to continue to earn your loyalty by dedicating our efforts to the constant improvement of our items and services in order to ensure the satisfaction of our end-users, customers, employees, suppliers and the worldwide communities in which we cooperate.