Leading Manufacturer for E7028 Electrode - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao
Leading Manufacturer for E7028 Electrode - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao Detail:
ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047
APPLICATION:
Used for jointing or overlay light alloy processing. It also widely used as filler materials in argon arc welding and oxyacetylene gas welding.
Argon arc welding is a perfect method for welding copper aluminum alloy.
Argon arc welding can not use flux, but oxyacetylene gas welding needs to use aluminum gas welding flux.
The selection of welding wire is mainly based on the type of base metal and the requirements of crack resistance, mechanical properties and corrosion resistance of the joint.
INTRODUCTION:
ER4047 is the eutectic aluminum silicon alloy welding wire with about12% Si element.
Suitable for Al-Si, Al-Si-Mg, Al Si mg Cu wrought aluminium and aluminium (7%Si) argon arc welding. Low melting point and good fluidity.
CHARACTERISTICS:
- Welding Filler Wire
- Spray and Flame Metallizing Wire
- Similar to AlSi12 (Germany), BS N21 (United Kingdom)
- Lower melting point and higher fluidity than 4043 wires
- Can be used as a substitute for 4043 wires to increase silicon in the weld metal, minimize hot cracking and produce higher fillet weld shear strength
- widely used for brazing of aluminum, Al-Mn, Al-Si-Mg alloy materials
SPECIFICATION:
MIG: 0.6mm; 0.8mm; 0.9mm; 1.0mm; 1.2mm; 1.6mm
TIG: 1.2mm; 1.6mm; 2.0mm; 2.4mm; 3.0mm; 4.0mm;
Typical Chemical Composition Of Deposited Metal:
| Cu | Si | Fe | Mn | Mg | Cr | Zn | Ti | Al | ||||||||
| 0.3 | 11.0-13.0 | 0.80 | 0.15 | 0.10 | 0.05 | 0.20 | - | Rem | ||||||||
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Leading Manufacturer for E7028 Electrode - ALUMINUM MIG WIRE TIG ROD Aluminum Alloy Welding Wire ER4047 – Tianqiao, The product will supply to all over the world, such as: Mexico, Argentina, Las Vegas, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
By Alberta from Mauritius - 2017.05.02 11:33
With a positive attitude of regard the market, regard the custom, regard the science, the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Antonio from India - 2017.05.21 12:31
