Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

Our mission should be to turn out to be an innovative supplier of high-tech digital and communication devices by furnishing benefit added design and style, world-class manufacturing, and repair capabilities for 2.5 Mm Welding Rods , Tungsten Rod 2.4 Mm , 309 Filler Rod , Welcomes all overseas friends and merchants to establish collaboration with us. We will provide you with honest, high quality and efficient service to meet your requirements.
Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas:  Gasless
Chemical Composition of deposited metal (%)

Item Mn Si P S A1 Ni Mo Cr C V
Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

Mechanical Properties Of Deposited Metal

Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
Test Temp.(°C) Impact Energy(J) Average(J)
Standard ≥400 ≥480 ≥20 / / /

5.Size and Recommended Current (DC-) and Voltage Range

Size Voltage Range Current (DC-) Wire feed speed
0.8MM 16~18V 100~160A 30~60
0.9MM 16~19V 100~170A 30~65
1.2MM 16~20V 120~200A 35~70

Available Diameters:

Dia. (mm): 0.8   0.9 1.0 1.2
(inch) 0.030” 0.035” 0 .040” 0.045”

Packing :
 1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.


Product detail pictures:

Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

No matter new customer or old customer, We believe in long term and trusted relationship for Manufacturer for 12 Gauge Welding Rod In Mm - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Bangalore, Istanbul, Sweden, we are sincerely hope to establish one good long term business relationship with your esteemed company thought this opportunity, based on equal, mutual beneficial and win win business from now till the future.

  • It's really lucky to find such a professional and responsible manufacturer, the product quality is good and delivery is timely, very nice.
    5 Stars By Vanessa from Oman - 2018.05.13 17:00
    Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
    5 Stars By Alan from Milan - 2017.08.18 18:38

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: