Manufacturer for 12 Gauge Welding Rod In Mm - Stainless Steel Welding Electrode AWS E309L-16（A062） – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

go on to boost, to be certain item quality in line with market and buyer standard demands. Our firm has a excellent assurance procedure happen to be established for Welding Electrode Holder , Ss 316 Welding Rod , 2.5 Mm Stainless Steel Welding Rods , We sincerely welcome both equally international and domestic company associates, and hope to work along with you during the in close proximity to foreseeable future!

Manufacturer for 12 Gauge Welding Rod In Mm - Stainless Steel Welding Electrode AWS E309L-16（A062） – Tianqiao Detail:

APPLICATIONS:

It is suitable for welding the same type of stainless steel structure, composite steel and dissimilar steel components made by synthetic fiber, petrochemical equipment, etc. It can also be used for surfacing of transition layer of inner wall of pressure equipment of nuclear reactor and welding of structure inside tower.

CHARACTERISTICS:

E309L-16 is an ultra-low carbon Cr23Ni13 stainless steel electrode used in rutile type pressure equipment. Cross – direct, can be used for all-position welding. The deposited metal has a low carbon content, so it can resist the inter crystalline corrosion caused by carbide precipitation when the stabilizer such as niobium and titanium is not contained.

ATTENTION:

1. Before welding, the electrode shall be baked at 320-350℃ for 1 hour and used as needed.
2. Remove rust, grease, moisture and other impurities before welding.
3. Dc power supply is recommended, because the depth of current welding is relatively shallow, the current should not be too large, so as to avoid redness and cracking of the skin.
4. Reduce the heat input as much as possible, and the swing amplitude of the electrode should not be too large.
5. Preheat and keep the temperature between channels below 150℃.

WELDING POSITIONS:

PA, PB, PD, PF

CHEMICAL COMPOSITION OF ALL WELDING METAL: (Wt. %)

Items	C	Mn	Si	S	P	Cr	Ni	Mo	Cu
Requirements	≤0.04	0.50~2.50	≤1.00	≤0.030	≤0.040	22.0~25.0	12.0~14.0	≤0.75	≤0.75
Typical results	0.024	1.32	0.65	0.007	0.021	23.30	12.90	0.045	0.035

MECHANICAL PROPERTIES OF ALL WELD METAL:

Items	Rm(MPa)	A/(%)
Requirements	≥510	≥25
Typical results	560	42

TYPICAL OPERATING PROCEDURES: (AC or DC+)

Diameter (mm)	2.0	2.5	3.2	4.0	5.0
Current (A)	40~80	50~100	70~130	100~160	140~200

PACKAGING:

5kg/box, 4boxes/carton, 20kgs/carton, 50cartons/pallet. 21MT -26MT per 1X20″ FCL.

OEM/ODM:

We support OEM/ODM and could make packaging accord to your design, please contact us for detail discussion.

FAQ:

Q1. What kind of fabric can you do?
A: We can supply various welding electrodes, the main models are AWS E6010,E6011,E6013,E7018, for mild steel welding, AWS E308-16, E308L-16, E309-16, E308L-16, E310-16, E312-16, E316-16, E316L-16 for stainless steel welding and etc. PLZ see the product categories for more details.

Q2. What is your term of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q3. What is your term of delivery?
A: FOB, CIF, CFR

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q5. Do you support OEM/ODM?
A: Yes, we support OEM/ODM, and could make packaging according to your design.

Q6. What is your sample policy?
A: We’re happy to provide sample for quality check and test purpose. The sample within 2kgs is free, freight at your cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.

Q8. How can you make sure your quality control?
We have ISO9001: 2008 certificate, full-time quality inspectors, professional test laboratory. The production is in strict accordance with international standards.

Q9. How about the packing?
Usually there are 5kgs in a box, 4boxes in a carton, 20kgs per carton. 50carton in a pallet, 1ton per pallet.

Q10. Can I visit your factory?
We warmly welcome friends from all over the world to visit us. You will surely meet our cordial hospitality.

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

Often customer-oriented, and it's our ultimate target to become not only probably the most reputable, trustable and honest provider, but also the partner for our customers for Manufacturer for 12 Gauge Welding Rod In Mm - Stainless Steel Welding Electrode AWS E309L-16（A062） – Tianqiao, The product will supply to all over the world, such as: Mauritius, Lithuania, Holland, Customer's satisfaction is always our quest, creating value for customers is always our duty, a long term mutual-beneficial business relationship is what we are doing for. We are an absolutely reliable partner for yourself in China. Of course, other services, like consulting, can be offered too.

12 Gauge Welding Rod In Mm

316l Welding Rod

7016 Electrode

Alloy Welding Rods

Big Welding Rods

Carbon Welding Electrode

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!