Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for 7014 Rod , E308l Welding Rod , Easiest Welding Rod , Should you be fascinated in any of our products and services, remember to do not hesitate to make contact with us. We're ready to reply you inside of 24 several hours soon after receipt of one's ask for and also to develop mutual un-limited advantages and organization in around potential.
Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas:  Gasless
Chemical Composition of deposited metal (%)

Item Mn Si P S A1 Ni Mo Cr C V
Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

Mechanical Properties Of Deposited Metal

Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
Test Temp.(°C) Impact Energy(J) Average(J)
Standard ≥400 ≥480 ≥20 / / /

5.Size and Recommended Current (DC-) and Voltage Range

Size Voltage Range Current (DC-) Wire feed speed
0.8MM 16~18V 100~160A 30~60
0.9MM 16~19V 100~170A 30~65
1.2MM 16~20V 120~200A 35~70

Available Diameters:

Dia. (mm): 0.8   0.9 1.0 1.2
(inch) 0.030” 0.035” 0 .040” 0.045”

Packing :
 1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.


Product detail pictures:

Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

We goal to understand excellent disfigurement from the manufacturing and supply the top support to domestic and abroad clients wholeheartedly for Manufacturing Companies for Welding Electrodes Supplier - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Nigeria, Paraguay, Dubai, We are increasingly expanding our international market share based on quality products, excellent service, reasonable price and timely delivery. Please contact us at any time for more information.

  • With a positive attitude of regard the market, regard the custom, regard the science, the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Laura from Hyderabad - 2017.10.27 12:12
    This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Nydia from Angola - 2017.10.25 15:53

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: