Massive Selection for Sanrico Welding - E71T-GS— flux cored welding wire – Tianqiao
Massive Selection for Sanrico Welding - E71T-GS— flux cored welding wire – Tianqiao Detail:
Applications:
AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.
Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.
Shielding Gas: Gasless
Chemical Composition of deposited metal (%)
| Item | Mn | Si | P | S | A1 | Ni | Mo | Cr | C | V |
| Standard | ≤1.75 | ≤0.60 | ≤0.03 | ≤0.03 | ≤1.80 | ≤0.50 | / | / | / | / |
Mechanical Properties Of Deposited Metal
| Item | Yield Point (MPa) | TensileStrength (MPa) | Elongation (%) | Charpy V-notch Impact Toughness | ||
| Test Temp.(°C) | Impact Energy(J) | Average(J) | ||||
| Standard | ≥400 | ≥480 | ≥20 | / | / | / |
5.Size and Recommended Current (DC-) and Voltage Range
| Size | Voltage Range | Current (DC-) | Wire feed speed |
| 0.8MM | 16~18V | 100~160A | 30~60 |
| 0.9MM | 16~19V | 100~170A | 30~65 |
| 1.2MM | 16~20V | 120~200A | 35~70 |
Available Diameters:
| Dia. (mm): | 0.8 | 0.9 | 1.0 | 1.2 |
| (inch) | 0.030” | 0.035” | 0 .040” | 0.045” |
Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
we are able to supply top quality items, aggressive price and greatest buyer assistance. Our destination is You come here with difficulty and we offer you a smile to take away for Massive Selection for Sanrico Welding - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Birmingham, Vancouver, Slovak Republic, We have been persisting in the business essence Quality First, Honoring Contracts and Standing by Reputations, providing customers with satisfying goods and service. Friends both at home and abroad are warmly welcome to establish everlasting business relations with us.
By Clara from azerbaijan - 2017.03.07 13:42
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Kim from Sri Lanka - 2017.06.25 12:48
