New Fashion Design for Stainless Welding Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao

Short Description:

Product Detail

Product Category

Product Tags

Feedback (2)

To fulfill the customers' over-expected satisfaction , we have now our strong crew to provide our greatest general assistance which incorporates promoting, gross sales, planning, creation, top quality controlling, packing, warehousing and logistics for Brutus Welding Rod , Hard Facing Welding Electrodes , 3.2 Mm Welding Rods Amps , To learn more about what we can do for you, contact us at any time. We look forward to establishing good and long-term business relationships with you.

New Fashion Design for Stainless Welding Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao Detail:

High manganese steel surfacing electrode D256 AWS: EFeMn-A

APPLICATIONS:

It is suitable for surfacing welding of various crusher, high manganese rail, bucket, bulldozer, etc.

CHARACTERISTICS:

THD256 is the surfacing electrode of high manganese steel with low hydrogen potassium coating.Can be both ac and dc (ac welding, no-load voltage is not lower than 70V), surfacing welding should use small current, narrow welding, while the red heat immediately hammer or water quenching, in order to reduce the crack tendency.The surfacing metal is austenitic high manganese steel, which has the characteristics of working hardening, toughness and wear resistance.

ATTENTION:

1. Before welding, the electrode shall be baked at 300-350℃ for 1 hour before use.

2. For surfacing welding of worn parts of high manganese steel, the fatigue layer shall be removed or treated with water toughness or soldered with chromium manganese steel electrode (such as D277).

3. Due to the large yellow smoke during surfacing welding, attention should be paid to strengthen ventilation and operate in the windswept position.

WELDING POSITIONS: PA, PB, PC, PD, PE, PF

DEPOSIT COMPOSITION (QUALITY SCORE): %

Items	C	Mn	Si	Others
Requirements	≤1.10	11.00-16.00	≤1.30	≤5.00

TYPICAL OPERATING PROCEDURES: (AC,DC)

Diameter (mm)	3.2	4.0	5.0
Current (A)	70-90	100-140	150-180

Product detail pictures:

Related Product Guide:
The composition of the welding electrode

We purpose to understand high quality disfigurement with the output and supply the top service to domestic and overseas buyers wholeheartedly for New Fashion Design for Stainless Welding Electrodes - High manganese steel surfacing electrode D256 AWS: EFeMn-A – Tianqiao, The product will supply to all over the world, such as: Turkey, Amman, Mumbai, In the future, we promise to keep offer the high quality and more cost-effective products, the more efficient after sales service to our all customers all over the world for the common development and the higher benefit.