PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for Welding Electrode 7018 , Jet Welding Rod , E8010 Welding Rod , We're prepared to present you with the most effective ideas over the designs of the orders in a qualified way for those who need. While in the meantime, we continue to keep on producing new technologies and building new designs so as to help make you ahead from the line of this small business.
PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao Detail:

APPLICATIONS:

It is suitable for the welding of thin pieces of cast iron welding and machining surfaces, such as cylinder heads, important gray cast iron engine blocks, gear boxes, and Machine Tool and soon.

CHARACTERISTICS:

THZ308 is pure nickel welding core, strong reduction of graphite type coating iron rod. It can be used in AC and DC dual purpose and is  easy to operate. When welding, it is not necessary for weldment to preheat. It has good crack resistance and processability.

RECAUTIONS:

1. Before welding, the electrodes need to be baked for 1 hour with the temperature of 150±10℃ before using.
2 It can eliminate welding stress and avoid crack by hammering the welding seam.
3. In order to reduce the impurity elements in the base metal penetration weld, narrow white band width, improve crack resistance and processing properties, it should use small current welding in cast iron cold welding.

Chemical Composition of the deposited metal(the mass fraction): %  

Elements

C

Si

Mn

S

Fe

Ni

The mass of other elements

Standard value

≤2.0

≤2.5

≤1.0

≤0.03

≤8.0

≥90

≤1.0

Welding reference current: (AC,DC+)

Electrode diameter(mm)

2.5

3.2

4.0

Welding current(A)

60-90

90-110

120-150

Welding distortion correction:

For deformation correction in hot state, mechanical correction and hammering are strictly prohibited in the range of blue brittle temperature (300℃~500℃) to avoid brittle cracks.

Pay attention to the following requirements when the flame is locally heated

It is not advisable to repeat heating at the same part to avoid changes in the metallographic structure and mechanical properties of the steel.

Do not cause repeated corrections of tension and compression in the same part.

For hardenable welded parts, watering and rapid cooling are strictly prohibited.

Welding parts that need to be annealed should be rectified before annealing to eliminate internal stress during annealing. During annealing, the welded parts must be placed steadily so as not to deform again.

The flame straightening heating temperature can be 700℃~850℃ (fuchsia), and should not exceed 900℃ (bright red) for low alloy structural steel.


Product detail pictures:

PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures

PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode  GB / T 10044 EZNi-1 AWS ENi-C1    JIS DFCNi – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

We thinks what customers think, the urgency of urgency to act during the interests of a purchaser position of theory, allowing for much better good quality, lower processing costs, prices are extra reasonable, won the new and old buyers the support and affirmation for PriceList for Welding Electrodes 1.6 Mm - Z308  Pure nickel cast iron electrode GB / T 10044 EZNi-1 AWS ENi-C1 JIS DFCNi – Tianqiao, The product will supply to all over the world, such as: Palestine, Australia, Sheffield, We welcome you to visit our company & factory and our showroom displays various products and solutions that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to supply you with the best services. If you will need more information, please do not hesitate to contact us via E-mail, fax or telephone.

  • The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
    5 Stars By Delia from Mozambique - 2017.11.11 11:41
    We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
    5 Stars By Diana from Barbados - 2017.09.28 18:29

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: