Professional Design 10 Gauge Welding Rod - E71T-GS— flux cored welding wire – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

We take customer-friendly, quality-oriented, integrative, innovative as objectives. Truth and honesty is our management ideal for Specification Of Welding Electrode , Electrode Positive Welding , Dc Welding Rods , Are you still looking for a quality product that is in accordance with your good company image while expanding your product range? Try our quality products. Your choice will prove to be intelligent!
Professional Design 10 Gauge Welding Rod - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas:  Gasless
Chemical Composition of deposited metal (%)

Item Mn Si P S A1 Ni Mo Cr C V
Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

Mechanical Properties Of Deposited Metal

Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
Test Temp.(°C) Impact Energy(J) Average(J)
Standard ≥400 ≥480 ≥20 / / /

5.Size and Recommended Current (DC-) and Voltage Range

Size Voltage Range Current (DC-) Wire feed speed
0.8MM 16~18V 100~160A 30~60
0.9MM 16~19V 100~170A 30~65
1.2MM 16~20V 120~200A 35~70

Available Diameters:

Dia. (mm): 0.8   0.9 1.0 1.2
(inch) 0.030” 0.035” 0 .040” 0.045”

Packing :
 1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.


Product detail pictures:


Related Product Guide:
The composition of the welding electrode

It is actually our accountability to satisfy your needs and effectively serve you. Your pleasure is our best reward. We're on the lookout forward for your stop by for joint growth for Professional Design 10 Gauge Welding Rod - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Tunisia, Pretoria, Swedish, We welcome you to visit our company & factory and our showroom displays various products and solutions that will meet your expectations. Meanwhile, it is convenient to visit our website. Our sales staff will try their best to supply you with the best services. If you will need more information, please do not hesitate to contact us via E-mail, fax or telephone.

Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
5 Stars By Elsa from Cyprus - 2018.06.30 17:29
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
5 Stars By Murray from moldova - 2017.10.25 15:53

Send your message to us:

Write your message here and send it to us

Related Products

Send your message to us: