Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao

Short Description:


Product Detail

Product Category

Product Tags

Related Video

Feedback (2)

With our loaded encounter and considerate services, we have now been recognized as a trustworthy supplier for lots of worldwide consumers for Superon Welding Electrodes , Stainless Steel Filler Rod , Di Welding Rod , Our products are widely used in many industrial fields. Our Company Services Division in good faith for the purpose of the quality of survival. All for customer service.
Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao Detail:

Applications:

AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.

NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.

Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.

Shielding Gas:  Gasless
Chemical Composition of deposited metal (%)

Item Mn Si P S A1 Ni Mo Cr C V
Standard ≤1.75 ≤0.60 ≤0.03 ≤0.03 ≤1.80 ≤0.50 / / / /

Mechanical Properties Of Deposited Metal

Item Yield Point (MPa) TensileStrength (MPa) Elongation (%) Charpy V-notch Impact Toughness
Test Temp.(°C) Impact Energy(J) Average(J)
Standard ≥400 ≥480 ≥20 / / /

5.Size and Recommended Current (DC-) and Voltage Range

Size Voltage Range Current (DC-) Wire feed speed
0.8MM 16~18V 100~160A 30~60
0.9MM 16~19V 100~170A 30~65
1.2MM 16~20V 120~200A 35~70

Available Diameters:

Dia. (mm): 0.8   0.9 1.0 1.2
(inch) 0.030” 0.035” 0 .040” 0.045”

Packing :
 1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.


Product detail pictures:

Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao detail pictures

Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao detail pictures


Related Product Guide:
The composition of the welding electrode

Our rewards are lower costs,dynamic profits team,specialised QC,potent factories,high-quality services for Special Design for Welding Cast Steel - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Rio de Janeiro, Panama, Sri Lanka, Nowadays our merchandise sell all over the domestic and abroad thanks for the regular and new customers support. We supply high quality product and competitive price, welcome the regular and new customers cooperate with us!

  • The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
    5 Stars By Fernando from panama - 2018.06.26 19:27
    This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
    5 Stars By Lynn from Rome - 2018.06.26 19:27

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us: