Top Quality 9018 Electrode - E71T-GS— flux cored welding wire – Tianqiao
Top Quality 9018 Electrode - E71T-GS— flux cored welding wire – Tianqiao Detail:
Applications:
AWS 5.20 E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
NOTE: As with all self-shielded wires, E71T-GS does contain fluoride compounds, which require more attention to ventilation when being used to weld galvanized steel. The zinc oxide formed during welding should not be inhaled as it can cause metal fume fever. When welding indoors or in an enclosed area, be sure that the ventilation is adequate.
Self-shielding, all-positional flux-cored wire for single pass applications. Excellent for use on thin gauges of galvanized & mild steel. Travel speed is high & weld edges are smooth. It has a smooth arc action, full slag coverage, easy slag removal & low spatter. No shielding gas is required. The use of DC straight polarity welding current minimises the risk of burn through. Deposition efficiency is higher than that of shielded metal arc electrodes.
Shielding Gas: Gasless
Chemical Composition of deposited metal (%)
Item | Mn | Si | P | S | A1 | Ni | Mo | Cr | C | V |
Standard | ≤1.75 | ≤0.60 | ≤0.03 | ≤0.03 | ≤1.80 | ≤0.50 | / | / | / | / |
Mechanical Properties Of Deposited Metal
Item | Yield Point (MPa) | TensileStrength (MPa) | Elongation (%) | Charpy V-notch Impact Toughness | ||
Test Temp.(°C) | Impact Energy(J) | Average(J) | ||||
Standard | ≥400 | ≥480 | ≥20 | / | / | / |
5.Size and Recommended Current (DC-) and Voltage Range
Size | Voltage Range | Current (DC-) | Wire feed speed |
0.8MM | 16~18V | 100~160A | 30~60 |
0.9MM | 16~19V | 100~170A | 30~65 |
1.2MM | 16~20V | 120~200A | 35~70 |
Available Diameters:
Dia. (mm): | 0.8 | 0.9 | 1.0 | 1.2 |
(inch) | 0.030” | 0.035” | 0 .040” | 0.045” |
Packing :
1kg / 5kgs per spool;
precision winding, heat shrinkable film and then packed in cartons.
Product detail pictures:
Related Product Guide:
The composition of the welding electrode
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Top Quality 9018 Electrode - E71T-GS— flux cored welding wire – Tianqiao, The product will supply to all over the world, such as: Angola, Canada, Pakistan, Abiding by our motto of Hold well the quality and services, Customers Satisfaction, So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.
By Elaine from Madagascar - 2018.02.08 16:45
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By David Eagleson from Nicaragua - 2017.11.20 15:58